10 Best HDMI Matrix Switches for Gaming Consoles in 2026: Compare 4K and 8K Setups

Choosing among HDMI matrix switches for gaming consoles can simplify a setup with multiple consoles, TVs, monitors, soundbars, and AV receivers. The right model lets you route several HDMI sources to one or more displays without constantly swapping cables.

This roundup compares 10 options across compact 4×2 designs, flexible 4×4 units, and higher-capacity 8×8 hardware. Pay close attention to resolution, refresh rate, HDR support, audio extraction, downscaling, control methods, and compatibility with your consoles and displays.

Best 10 Hdmi Matrix Switches for Gaming Consoles Picks for 2026

Best 8K Performance – OREI 4×2 HDMI 2.1 Matrix

For shoppers comparing HDMI matrix switches for gaming consoles, the OREI BK-402A is the most capable option here. It combines four HDMI inputs, two independently switchable outputs, 40Gbps bandwidth, and support for 4K at 120Hz and select 8K modes, making it suited to newer gaming and home theater setups.

Best For: Gamers using HDMI 2.1 consoles, high-refresh displays, and external audio equipment.

Pros:

• Supports 4K@120Hz, VRR, ALLM, and FVA for smoother gaming.
• Routes four sources independently to two displays.
• Includes eARC, optical, and 3.5mm audio extraction options.
• Offers EDID management and 4K/8K support with HDCP 2.3.

Cons:

• eARC requires compatible eARC-equipped TV and soundbar.
• Its advanced features may be more than needed for older HDMI systems.

The BK-402A stands out when gaming performance and audio flexibility matter most. It is a strong fit for a multi-console setup built around HDMI 2.1 equipment.

Best for Four Displays – Groza 4×4 HDMI Matrix Switch

The Groza 4×4 is a practical choice among HDMI matrix switches for gaming consoles when you need to connect several sources and displays. It accepts four HDMI inputs and routes them to four outputs, though its 4K support tops out at 30Hz and switching can take about five seconds.

Best For: Budget-conscious setups with multiple consoles, monitors, or projectors that do not require 4K at 60Hz or higher.

Pros:

• Connects four HDMI sources to four HDMI displays.
• Compatible with systems including PS3, PS4 Pro, Xbox, and Nintendo Switch.
• Can be controlled with the included IR remote or front-panel button.
• Supports 3D, HDCP 1.4, and resolutions up to 3840×2160@30Hz.

Cons:

• Does not support 4K@60Hz.
• All connected displays follow the lowest detected resolution through auto EDID.
• Source changes may take approximately five seconds to appear.

The Groza makes sense for basic multi-display distribution and mixed older gaming hardware. Buyers with 4K/60Hz or newer HDMI 2.1 consoles should choose a more advanced matrix instead.

Best 4K/60Hz Value – OREI 4×2 HDMI 2.0 Matrix

The OREI UHDS-402A is a balanced option for HDMI matrix switches for gaming consoles using HDMI 2.0 equipment. Its four inputs and two independent outputs support 4K at 60Hz, while EDID controls, HDR compatibility, audio extraction, and downscaling help it fit flexible living-room or home-theater systems.

Best For: Console users who need 4K/60Hz switching, two displays, and convenient audio routing without HDMI 2.1 gaming features.

Pros:

• Supports 4K@60Hz with 18Gbps bandwidth and 4:4:4 color.
• Routes four sources independently to two displays.
• Supports Dolby Vision, HDR10+, and HLG.
• Provides optical and analog audio extraction, ARC, EDID modes, and downscaling.

Cons:

• Does not support 4K@120Hz, VRR, or ALLM.
• Proper EDID selection may be needed for stable mixed-resolution operation.
• High-quality HDMI 2.0/2.1 cables under 30 feet are recommended for stable 4K/60Hz performance.

This OREI model is a sensible middle ground for 4K/60Hz consoles and displays. It offers useful audio and compatibility features while avoiding the cost of a higher-bandwidth HDMI 2.1 matrix.

Best for Mirrored Displays – avedio links 2×4 HDMI Matrix

The avedio links 2×4 offers a straightforward way to share two gaming or media sources across as many as four displays. For buyers considering HDMI matrix switches for gaming consoles, it provides 4K at 60Hz, HDR10, audio extraction, and basic downscaling, but its outputs mirror the same image rather than creating separate screens.

Best For: Gaming rooms, demonstrations, or home theaters that need one synchronized source displayed on multiple screens.

Pros:

• Supports 4K@60Hz, HDMI 2.0, HDCP 2.2, and HDR10.
• Displays one selected source simultaneously on up to four outputs.
• Includes SPDIF optical and 3.5mm AUX audio outputs.
• Supports 4K and 1080p output together through output-one downscaling.

Cons:

• All four outputs show the same screen; split-screen and extended display modes are not supported.
• Downscaling is limited to 1080p and is assigned to output one.
• HDR may need to be disabled at the source if a connected display does not support it.

This is a good fit when synchronized multi-screen output is more important than independent routing. It is less suitable for users who want different console sources on different displays at the same time.

Rack-Ready Control Hub – OREI 8×8 HDMI Matrix

For large gaming and home theater setups, this OREI is one of the more expandable HDMI matrix switches for gaming consoles, connecting up to eight sources and routing them independently to multiple displays. It supports 4K at 30Hz, downscaling, EDID management, and several control methods.

Best For: Multi-console, multi-display installations that need rack mounting, presets, and advanced control.

Pros:

• Connects up to eight HDMI sources and routes them independently to eight outputs.
• Supports mixed 4K and 1080p displays through output downscaling.
• Offers up to eight presets plus IR, RS-232, LAN, WebGUI, and front-panel control.
• Supports Dolby Atmos, DTS:X, and other surround formats.

Cons:

• 4K support is limited to 30Hz.
• Its rack-oriented design and extensive controls may be more than a small gaming setup needs.

This is a strong choice when your priority is routing flexibility and installation control rather than high-refresh-rate 4K gaming. Confirm that 4K at 30Hz meets your console and display requirements.

4K60 Audio Specialist – OREI 4×4 HDMI Matrix

This OREI 4×4 is a practical pick among HDMI matrix switches for gaming consoles when you need 4K at 60Hz along with flexible audio routing. It connects four sources to four displays and adds ARC, optical, and 3.5mm audio extraction.

Best For: Home theater or gaming setups that need 4K60 switching and separate audio outputs.

Pros:

• Supports 4K at 60Hz with 18Gbps bandwidth, HDR, and HDCP 2.2.
• Independently routes four HDMI inputs to four HDMI outputs.
• Provides optical and 3.5mm audio extraction, with ARC support on Output A.
• Supports a broad range of HDMI audio formats, including Dolby TrueHD and DTS-HD Master Audio.

Cons:

• Offers fewer inputs and outputs than an 8×8 matrix.
• The supplied notes do not specify advanced network or RS-232 control.

For console users who want smoother 4K60 output and dedicated audio connections, this model offers a balanced feature set. Its 4×4 layout is best suited to moderate-sized systems rather than large commercial installations.

Compact Audio-Extracting Switch – ENBUER 4×2 HDMI Matrix

This compact ENBUER is a useful entry in HDMI matrix switches for gaming consoles, allowing four sources—including consoles such as PS4 Pro, Xbox One, and Nintendo Switch—to share two displays. It also extracts audio through optical and 3.5mm outputs while supporting 4K at 60Hz and HDR.

Best For: Smaller console setups with two displays and separate stereo or optical audio.

Pros:

• Connects four HDMI sources to two displays and supports independent switching.
• Supports 4K at 60Hz, HDR, HDMI 2.0b, HDCP 2.2, and RGB 4:4:4.
• Extracts audio through Toslink optical and 3.5mm stereo outputs.
• Supports 18.5Gbps data rates and multiple EDID settings.

Cons:

• Provides only two HDMI outputs.
• EDID configuration is centered on Output A and may require restarting the switch after changes.
• The notes specify LPCM, Dolby, and DTS 5.1 support rather than newer immersive formats.

This model fits gamers who need to consolidate several consoles and feed two screens without moving cables. Its audio extraction is especially useful for a sound system or headphones, but the EDID process may require some setup attention.

Versatile Multi-Display Pick – OREI 4×4 HDMI Matrix

For shoppers comparing hdmi matrix switches for gaming consoles, this OREI 4×4 model is built for setups with several sources and displays. It supports up to 4K at 60Hz, HDR, HDCP 2.2, and 18Gbps bandwidth, while its downscaling feature allows 4K and 1080p screens to work together.

Best For: Multi-console or multi-display gaming setups that need flexible routing and mixed-resolution support.

Pros:

• Routes up to four HDMI sources to four displays, with identical or independent content.
• Downscales 4K content to 1080p for compatibility with older displays.
• Supports 4K@60Hz, HDR, HDCP 2.2, and up to 7.1-channel digital audio.
• Includes a dual-voltage power supply, international adapter, and one-year warranty.

Cons:

• Its four-output design may be more than needed for a simple two-screen setup.
• Requires an AC adapter rather than drawing power through HDMI.

This is a strong all-around choice when you want to connect multiple gaming consoles and distribute them across several displays without giving up 4K60 support or useful audio formats.

Compact Audio-Ready Pick – OREI 4×2 HDMI Matrix

This OREI 4×2 is a practical option among hdmi matrix switches for gaming consoles when you need to connect four sources but only use two displays. It combines 4K@60Hz video, HDR, downscaling, ARC, and dedicated audio outputs in a compact design.

Best For: Gaming and home-theater setups with four HDMI sources, two displays, and flexible audio-routing needs.

Pros:

• Connects four HDMI sources to two displays with independent switching.
• Supports 4K@60Hz, HDR, 12-bit deep color, and 18Gbps bandwidth.
• Downscales 4K to 1080p while preserving the main 4K output.
• Offers ARC plus optical and 3.5mm audio outputs, with remote control included.

Cons:

• Provides only two HDMI outputs, limiting larger multi-screen installations.
• It is designed around HDMI 2.0 features rather than newer HDMI standards.

Choose this model if your console setup centers on two displays and you want audio extraction or ARC support without adding a separate HDMI switch and audio device.

Control-Focused Value Pick – Yinker 4×4 HDMI Matrix

The Yinker HD414 is worth considering among hdmi matrix switches for gaming consoles if you value hands-on control and saved display configurations. It routes four inputs to four outputs, supports 4K at 30Hz, and includes panel, IR remote, and RS232 control.

Best For: Gaming centers, conference-style installations, or users who want multiple control methods and stored display scenes.

Pros:

• Routes four HDMI inputs to four displays simultaneously or individually.
• Offers panel buttons, an IR remote, and RS232 control.
• Supports EDID management and saves or recalls up to 16 display scenes.
• Can downscale 4K and 1080p content together and supports 4:4:4 color.

Cons:

• Its maximum 4K refresh rate is 30Hz, below the 4K60 support of the OREI options.
• It is not a video-wall controller and cannot create a 2×2 TV wall.
• The remote does not include batteries, according to the supplied notes.

This model makes the most sense for managed installations where EDID tools, RS232 control, and scene memory matter more than 4K gaming at 60Hz.

How We Picked These Hdmi Matrix Switches for Gaming Consoles

We focused on matrix switches that offer practical routing flexibility for console-centered entertainment systems. The selection includes 2×4, 4×2, 4×4, and 8×8 layouts, so shoppers can match the number of HDMI sources and displays they actually use. We also considered listed support for 4K and 8K signals, 60Hz gaming, HDR, HDCP 2.2, ARC or eARC, EDID management, audio extraction, downscaling, IR remotes, RS-232, and network control.

Specifications can vary by input, output, cable length, and connected equipment. Confirm the manufacturer’s compatibility details before buying, especially for newer consoles, 4K high-refresh gaming, and advanced audio formats.

Quick Comparison

• For a compact dual-display setup: Choose a 4×2 model if you need several consoles routed to a TV and secondary display.
• For multiple TVs or monitors: A 4×4 matrix provides more simultaneous routing combinations.
• For larger installations: An 8×8 model suits media rooms, gaming spaces, and AV systems with many sources and displays.
• For newer video standards: Look for explicit 4K at 60Hz or 8K support, HDR compatibility, and suitable HDCP handling.
• For soundbar or receiver integration: Prioritize ARC, eARC, optical, or 3.5mm audio extraction as needed.

Key Buying Factors for Hdmi Matrix Switches for Gaming Consoles

Inputs, Outputs, and Routing

Count every console, streaming device, PC, and other HDMI source, then count the displays you want to use. A 4×2 switch may be enough for one main TV and one monitor, while a 4×4 or 8×8 model leaves more room for expansion. Check whether each input can route independently to each output.

Resolution, Refresh Rate, and HDR

Console gamers should verify the exact combination of resolution and refresh rate supported. “4K” alone does not guarantee 4K at 60Hz, HDR, or full chroma performance. If you use an 8K display, choose a switch that explicitly lists 8K support and check whether all desired features work simultaneously.

Audio and Compatibility

Audio extraction can send sound to powered speakers, a receiver, or a soundbar, while ARC and eARC can simplify TV-based audio routing. EDID controls may help resolve handshake problems between consoles and displays. Also check HDCP support, cable requirements, remote range, and whether the unit offers downscaling for mixed-resolution screens.

Who Should Buy Which Hdmi Matrix Switches for Gaming Consoles?

Buy a 4×2 switch if you have several sources but only one or two displays. Choose a 4×4 model if you want flexible routing across multiple TVs or monitors and expect to add equipment later. Consider an 8×8 unit for a dedicated media room, shared gaming space, or complex installation requiring centralized control. If you mainly need to select one console at a time on one TV, a basic HDMI switch may be less expensive and easier to manage than a matrix.